How to Change a Fitbit Versa Watchband

The hardest part is removing and reinserting a pin that holds the band in place.

The pin can usually be moved with your fingers, but in some cases, a small screwdriver or similar may be a better option.

How to Change a Fitbit Versa Watchband

1. Pull down on the pin to release the watch band.



2. Gently lift and pull the watch band.



3. The new band can now be inserted.



4. Place the bottom of the pin into the watch.



5. Move the top of the band inward.



6. Angle the watch band for placement.



7. Pull down on the top pin.



8. Tug on newly placed watch band.

Tips for When Changing a Fitbit Versa Watchband

• Holding your Fitbit watch, pull down on the pin which will release the band from the top of your watch.
• With the bottom of the pin pressed down, showing more pin at the bottom of the band. Place the pin into the small hole indentation at the bottom of the watch itself. You may or may not hear a click when it is inserted into the bottom of the watch.
• In preparation for placing the top pin into the top slot, always securing the bottom pin is still in place.
• You will want to make sure the watchband is not straight out but at an inward angle.
• With the bottom part of the watch secured in place, use your thumb or index finger to pull the top of the pin-down and push the top part of the band into place. Release the pin; you may or may not hear a click as it pops into place.
• Give the band a light tug to make sure it is tightly in place.

Summary
Changing out a Fitbit Versa Watchband is easy enough to do by sliding the small pin that holds it in place.

The easy part is removing the band, but it can be a little tricky to replace or reattach a new watchband.

It is recommended you use your thumb or index finger while securing the bottom pin in place.

It is important that you insert the bottom pin as shown above first, or it will be difficult to get your watchband to lock into place.